Battery Notice on Replacement
Chip for HP 110A Series
I Assembly Precautions of Replacement Chip for HP 110A Series
1. Operator: please wear finger stall and anti-static wristband during production, avoid contacting the chip directly.
2. Workbench: the workbench surface must be insulated, with entire antistatic body
3. Turnover and storage: special pallet for turnover, packaging, and storage must be used in the production process.
4. Please do not install the chip for testing before shipment.
5. Production process: it is not allowed to contact with metal objects or conductive bodies, avoiding extrusion and stacking of batteries.
6. Storage condition: avoid stacking of chips during the storage and installation; the batteries should be used and stored in temperature of no more than 60°C, avoid high temperature environment; avoid water.
7. Key protection area on chip: battery, contactors and components on the back of chip (as shown in the red mark in the figure below) are the key protection areas. it is necessary to avoid the above areas and short circuits during production and transportation.
II If the battery of replacement chip for hp 110a series is short circuited or data is lost can it be reworked?
Reply: For the battery of replacement chip for HP 110A series, in case it is short circuited or data is lost during operation, you may send back to rework by rewriting data, which only under condition that no damaged done to the hardware.
III Validity of Battery on Replacement Chip for HP 110A Series
Reply: The validity period of battery on replacement chip for HP 110A series is two years from initial delivery, including the reworked chips.
Suggestion: Due to the validity of battery, it is recommended that the customer arrange the delivery according to the principle of first in first out.